Sony 4-130-031-11(3) - Manual (Page 7)

7 GB
Indicators on the display
2 4 5 6 1 3 7 8
9 q; qa qs qd
Name Function
A LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B SLEEP
Lights up when the sleep timer is
activated (page 51).
C Playback
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.) indicate
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D
D Lights up when receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you have
made digital connections.
E S-AIR
Lights up when the S-AIR
transmitter (not supplied) is
connected.
L C R
SL SR SW
Name Function
F HDMI Lights up when a playback
component is connected to this
receiver using an HDMI jack
(page 19).
G Preset
station
indicators
Lights up when using the receiver
to tune in radio stations you have
preset. For details on presetting
radio stations, see page 42.
H Tuner
indicators
Lights up when using the receiver
to tune in radio stations (page 41),
etc.
I COAX Lights up when the source signal
is a digital signal being input
through the COAX IN jack.
J OPT
Lights up when the source signal
is a digital signal being input
through the OPT IN jack.
K PL/
PLII
“ PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals in
order to output the center and
surround channel signals.
“
PLII” lights up when the Pro
Logic II Movie/Music decoder is
activated.
L DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format disc,
be sure that you have made digital
connections.
M SW
Lights up when the audio signal is
output from the SUBWOOFER
jack.