Sony 4-130-031-11(3) - Manual (Page 16)

16 GB
Note on speaker cords
The connector of the speaker cords are the
same color as the speaker jack to be connected.
When connecting a speaker cord, be sure to
match the colored connector to the speaker
jack on the receiver:
To connect the speakers
correctly
Check the speaker type by referring to the
speaker label* at the rear panel of the speakers.
* The center speaker and subwoofer do not have the
character on the speaker label. For details on the
speaker type, see page 4.
3: Connecting the TV
You can watch the selected input image when
you connect the HDMI OUT jack to a TV.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Before connecting the cords, be sure to
disconnect the AC power cord.
Notes
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Connector Speaker jack
Red FRONT R
White FRONT L
Grey SUR R
Blue SUR L
Green CENTER
Purple SUBWOOFER
Character on
speaker label Speaker type
L Front left
R Front right
SL Surround left
SR Surround right
AM
ANTENNA
RT
mA MAX
AUDIO IN
VIDEO 1 VIDEO 2
R
L
R
AUDIO IN
SA-CD/CD
COAX IN
SAT
OPT IN AUDIO IN
TV
DIGITAL
OPT IN
TV
HDMI
BD IN OUT SAT IN DVD IN
L
TV
Audio signal
A
A Audio cord (not supplied)
B Optical digital cord (not supplied)
C HDMI cable (not supplied)
We recommend that you use a Sony HDMI
cable.
Audio/video
signal
B C