Sony 4-130-031-11(3) - Manual (Page 21)

21 GB
Ge
tt
ing St
ar
te
d
Notes
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• Be sure to connect the video output of the DVD
player, DVD recorder and VCR to the TV, so that
the image is displayed on the TV. Refer to the
operating instructions of each connected
component for details.
• You cannot do recording on the DVD recorder or
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
5: Connecting the
antennas
Connect the supplied AM loop antenna and
FM wire antenna.
Before connecting the antennas, be sure to
disconnect the AC power cord (mains lead).
* The shape of the connector varies depending on
the area code of this receiver.
Notes
• To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
RT
HDMI
mA MAX
BD IN OUT SAT IN DVD IN
AUDIO IN
VIDEO 1 VIDEO 2
L
R
L
R
AUDIO IN
SA-CD/CD
COAX IN
SAT
OPT IN OPT IN AUDIO IN
TV
DIGITAL TV
AM
ANTENNA
FM wire antenna (supplied)
AM loop antenna (supplied)