Spirit XR425 - Manual (Page 14)

XR 425
13
XR425 Console
Power on
The XR425 Bike comes with a 24 volt AC power supply that plugs into the front of the Bike. Once
the power supply is connected the console will power on. When initially powered on the console
will perform an internal self-test. During this time all the lights will turn on for a short time. When
the lights go off the dot matrix display will show the software version (i.e. VER 1.0) and the
message window will display Odometer while the Time and Distance window show how many
hours the Bike has been used and how many virtual miles the Bike has gone.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different profiles, showing the programs,
and the message window will be scrolling the start up message. You may now begin to use the
console.
Operation of Your Stationary Bike