Sangean RCR-2 - Manual (Page 11)

10
GB
Note:
If there is Daylight Saving Time ( D.S.T.) system in your place,
after pressing SET button, press Mode button once will
advance one hour on time setting, Display will show D.S.T.
symbol indicating the time is under D.S.T. status.
DATE
Press DATE button, display DATE will blink. Press SET button,
display will blink year with a beep and a small Y (year) will appear,
1. Set the year with key + or -.
2. Press SET button again and follow the setting of year to set the
month and date .
3. Confirm DATE setting by pressing DATE button again.
Now the display will show time, date, week day, second and
symbol .
You can always adjust the time manually whenever is required by
following above procedures.