Sangean RCR-2 - Manual (Page 12)

11
Radio operation
Turn on the radio with the Power on/off key 1.
Tune into desired stations
Manual station selection
1. With the key 15 Tuning + and -, you can tune into the frequency of
your desired stations.
2. Scanning tuning
Press and hold key 15 + or – for more than 0.5 seconds and
release, the radio will search for the next station.
Storing the preset stations
Tune into the stations.
Select a memory preset button and press for more than 2 seconds
until a confirmed beep sounds and display M stops blinking. The
station is now stored.
Note:
When you store a new station in a memory slot, the station
previously in that slot is automatically erased.
Recall the station memories
Recall the station memories, simply select the required bands and
press required station memory slot buttons 1-7.
Volume
You can select the required volume by adjusting the Volume control
button 18.