SIIG 04-0600A - Manual (Page 3)

3
Installation
Please read the instructions prior to installation. This
speaker mount is designed solely for the mounting of
small speakers weighing less than 8lbs. We are not
responsible for damage that may occur if speakers
weighing more than 8lbs. are used.
The user will have to determine which type of configuration
will work best with the included mounting hardware. If
the included hardware does not fit with the application,
the appropriate hardware will have to be purchased.
Single Hole Mounting
1. Most satellite speakers will require the use of the
M5 x 20mm machine screw used in combination
with M5 x 1/8" plastic washer. The plastic washer
is used as a spacer between the threaded insert and
the post, see Figure 1 below. It is critical the plastic
washer is used correctly.
M5 x 20mm
Machine Screw
Mounting Post
M5 x 1/8"
Plastic Washer
Back Speaker
Figure 1