Samsung SHR-7160 - Manual (Page 21)

English _21

CONNECTING WITH OTHER DEVICE
CONNECTING POS DEVICE
You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with
a RS-232C cable.
Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the
<POS Device Setup> button and set <Baud rate, Parity, Data, Stop bit and Transfer Type>. (Page 45)
CONNECTING THE ALARM INPUT/OUTPUT
The Alarm In/Out port at the back is composed of the following.
Alarm In/Out Port on 7080/7082/8080/8082
Alarm In/Out Port on 7160/7162/8160/8162
ALARM IN 1 ~ 8 (SHR-7080/7082/8080/8082) : Alarm Input Port
ALARM IN 1 ~ 16 (SHR-7160/7162/8160/8162) : Alarm Input Port
ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes
sensing.
ALARM OUT 1 ~ 4 : Alarm Output Port
1.
2.
1.
2.
•
•
•
•
ALARM OUT ALARM IN ALARM IN