Samsung SHR-7160 - Manual (Page 31)

English _31

LIVE
Switching to Single Mode
In a split mode, select and double-click a desired channel to switch to its Single mode.
Press the number corresponding to a desired channel on the front panel or the remote control to switch to its
Single mode.
Refer to “Remote Control>Using the numeric buttons”. (Page 12)
Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.
SPOT OUT
The SPOT OUT monitoring is independent of the Live mode, which monitors a specifi c channel through the SPOT
OUT port.
Selecting a SPOT OUT mode
If an event occurs such as sensor, motion or alarm from the SPOT OUT port in connection with a monitor, you
can select a output screen mode.
In Live mode, right-click any area on the screen.
The Live menu appears.
Click SPOT OUT.
The split screen appears according to the SPOT OUT
source. (Page 47)
SPOT OUT 1 : Supports 16-, 9-, 4-split, Auto Sequence and
Single modes.
SPOT OUT 2, 3, 4 : Supports 4-split, Auto Sequence and Single
modes.
For the SPOT OUT port of a model, refer to “Part Names and
Functions (Rear)”. (Page 10)

1.
2.



CH1 CH2 CH3 CH4
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16 CH3
SPOT OUT 1
SPOT OUT 2
SPOT OUT 3
SPOT OUT 4
Scene Mode
SPOT OUT
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Launcher hide
Logout
16-split
9-split
4-split
Auto Sequence
Single
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
< Multichannel Live Menu >