Samsung SHR-7160 - Manual (Page 62)

62_ using the DVR
using the DVR
CONTROLLING A PTZ DEVICE
The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference.
PTZ Device
The PTZ device can be activated only if a channel in connection with the PTZ camera is selected.
Getting started with PTZ
The PTZ camera is available, only if a channel is selected, in the following way:
Using the button on the remote control or the front panel
Select the [PTZ] button on the remote control or the front panel.
Using the launcher menu
Click PTZ <
PTZ > to display the live launcher.
Using the right-click menu in Live mode
Right-click any area on the screen to display the context menu, and
select <PTZ Control>.
Using icons on the live screen
Click the PTZ <
> icon on the live screen.
The PTZ function is available only if the PTZ camera is
connected so that the PTZ icon is displayed on the screen.
Using the PTZ camera
You can use one camera to perform all functions of PAN, TITL and ZOOM for monitoring multiple places and
set the preset to your preference in a desired mode.
Launch the <PTZ Control> menu.
As the PTZ <
> icon on the bottom right corner turns
yellow, you access the “PTZ Control” mode to display the
“PTZ Control” menu.
Use direction keys in the launcher menu or use direction
buttons (▲▼◄ ►) on the remote control or the front panel
to move the target area to record.
Zoom : You can use the Zoom function of the PTZ camera.
Auto Pan : The camera automatically runs between the two
points that you selected.
Scan : The camera moves to the preset points in the
specifi ed sequence.
If multiple presets are specifi ed, the PTZ camera will automatically move to all of the preset points one at a
time.
Pattern : Makes the PTZ camera remember and follow the past route.
The functions of Auto Pan, Scan and Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and are
different in terms of the name and setting, depending on the protocols of Samsung, Panasonic and Pelco.
(Panasonic : Auto Pan, Sequence, Sort / Pelco : Auto Pan, Frame Scan, Pattern)
Before entering the PTZ device control mode, set the values of the PTZ device in the <Setting the PTZ> menu.
(Page 42)




M 
1.
2.
•
•
•
•

M 
PTZ Alarm Freeze
Scene Mode
SPOT OUT
PTZ Control
ZOOM
Audio
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Launcher hide
Logout
PTZ Control CAM01
Delete Delete All
Preset
Select Preset
OK
Save/Add Rename
Cam. Setup
Auto Pan
Scan
Pattern