Samsung SPD-3750T - Manual (Page 29)

SPEED DOME CAMERA User’s Manual 56 SPEED DOME CAMERA User’s Manual 57
Tour SEQ
 Setting
 Execute
 Clear
Sequence Setting
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
 Power On Resume ON
 MD Dwell Time OFF
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
➡
Tour SEQ
NO Group DWT(s)
01: * 003
02: * 003
03: * 003
04: * 003
05: * 003
06: * 003
13. Tour SEQ
▶ Main Menu/Sequence Setting/Tour SEQ
Selecting Tour SEQ recalls groups of preset locations in a
consecutive manner. Up to 6 groups can be listed for this
function.
Settings :
Selecting the Settings menu brings up the following screen.
Using the joystick, you can enter desired group numbers to
the Group section. DWT indicates the camera’s standby
time before a new group is recalled.
Execute :
Executes the group operation.
Clear :
Deletes the selected group.
PTZ Trace
① Trace 1
② Trace 2
③ Trace 3
④ Trace 4
PTZ Trace 1
 Replay
 Memorize
Sequence Setting
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
 Power On Resume ON
 MD Dwell Time OFF
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
➡
➡
14. PTZ Trace
▶ Main Menu/Sequence Setting/PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan,
Tilt, Zoom and Focus) are memorized and replayed.
Replay :
Replays a route saved by the Trace function. Use the Stop
button to stop the replay.
Memorize :
Up to 120 seconds of a memory can be saved. The memory
duration varies depending on the difficulty level of the PTZ
Trace action. If the memory capacity is full, the Over
message appears and the memorization action is
terminated.
Functional Description Functional Description