Samsung SPD-3750T - Manual (Page 34)

SPEED DOME CAMERA User’s Manual 66 SPEED DOME CAMERA User’s Manual 67
Auto Release :
Enables setting a maximum duration to follow an object. When the duration expires, the camera
stops following the object and returns to the start position to follow another objects.
Auto Return :
- Off : Commands the camera to stay on a last spot instead of returning to the initial position.
- Time Setting : Sets a duration for the camera to standby upon the Auto Release expiration and
then return to the start position.
Lost Mode :
Sets up an action for the camera in case the object it is following goes out of the detection
range.
- Stop : Commands the camera to stop and abort tracking at the spot where its object
disappeared.
- Research : Commands the camera to stop and standby at the spot where its object
disappeared.
- Zoom-Out : Commands the camera to zoom out and look for a new object in case its current
object disappears.
P/T Setting
① Pan/Tilt Limit
② Area Setting
③ Area Masking
 Prop. P/T ON
 Digital Flip ON
 Image Hold OFF
⑦ Auto Track1
⑧ Auto Track2
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
Auto Track 2
① Zone Setting
 Indicator OFF
 Target Lock OFF
➡
Zone 1
① Position
② Mode MASK
③ ON/OFF OFF ⇨
Track Zone
① Zone 1
② Zone 2
③ Zone 3
④ Zone 4
⑤ Zone 5
⑥ Zone 6
⑦ Zone 7
⑧ Zone 8
This function is available only with the SPD-3750T.
Auto Track 2 provides Auto Track related settings other than
the ones programmed in the Auto Track 1 menu.
Zone Setting :
- Position : Enables designating certain areas as zones for
the Auto Track operation. The setting procedures
are the same as for Area Mask.
- Mode : Two modes are available: Mask and Alarm. When
Mask is selected, the camera does not follow the
object entering the masked zone. This is useful if
the camera catches swaying objects such as tree
branches and flags during the Auto Track peration.
When Alarm is selected, the camera activates an
alarm if an object enters the zone.
- On/Off : Activates or deactivates the Zone function.
Indicator :
Indicates objects with icons on the screen.
- Off : Disables the Indicator function.
- On : Indicates both the pointer and target.
- Pointer : Indicates the indicator when following an object
using the joystick; shows as a cross in the center
of the screen.
23. Auto Track 2 (SPD-3750T Only)
▶ Main Menu/P/T Setting/Auto Track2
Functional Description Functional Description