Samsung SPD-3750T - Manual (Page 38)

SPEED DOME CAMERA User’s Manual 74 SPEED DOME CAMERA User’s Manual 75
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
Operating Your Camera
26. Initialization Menu
▶ Main Menu/Initialize
Power On Reset :
Restarts the camera.
Factory Default :
Enables resetting the camera to its factory default settings.
When the mode is selected, all custom data such as preset
locations is deleted from the camera.
Use this function if it is necessary to reset the settings of
the camera.
Camera Default :
This mode can be used if the camera module has been
replaced and you want to keep the camera's existing
settings for the new module.
To do reset the camera, first replace the old module with a
new camera module. When the replacement is properly
installed, turn on the module, then execute this command.
Auto Refresh :
Enables optimizing the status of the camera’s built-in
electric circuits and components on a regular basis. (A
regular operation can be scheduled.)
This mode can be used to maintain and repair the current
settings of the camera when anomalous operations occur:
e.g. The camera happened to directly face a light source, or
the settings have been canceled after the camera
repeatedly rotated in all four directions for a long time to
monitor a specific location.
The default setting is Off.
- Off, 1~7 Days: Selecting Off disables Auto Refresh and but
automatically executes it after 1~7 Days days has passed.
action once the refresh is complete.
Initialize ✽ Auto Refresh takes approximately 10 seconds to finish. If Auto Refresh activates in the middle of a
sequence action, the camera pauses the sequence action and performs an Auto Refresh, then
resumes the sequence action once the refresh is complete.
Auto Track Default :
Enables resetting the Auto Track settings.
Functional Description
Initialize
① Power On Reset
② Factory Default
③ Camera Default
 Auto Refresh OFF
⑤ Auto Track Default
➡