Stamina Products RECUMBENT BIKE - Manual (Page 6)

ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please call
our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: [email protected]
6
STEP 1
Attach the FRONT STABILIZER(8) onto the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x85mm)
(79) and NYLOCK NUTS(M8x1.25)(80).
STEP 2
Connect the PULSE EXTENSION WIRE(107) to the PULSE CONNECTION WIRE(103). Insert the REAR
FRAME(2) into the MAIN FRAME(1) and secure with SOCKET HEAD BOLTS(M8x1.25x50mm)(85).
STEP 3
Attach the REAR STABILIZER(9) onto the REAR FRAME(2) with CARRIAGE BOLTS(M8x1.25x85mm)
(79) and NYLOCK NUTS(M8x1.25)(80). Press the STAND CAPS(47) onto both sides of the REAR
STABILIZER(9).