SmartBridges sB3210 - Manual (Page 14)

Page 14 of 55
airPoint™ Nexus User Configuration Guide
i n t e l l i g e n t w i r e l e s s p l a t f o r m
Figure 2-6 Editable Boxes for Parameter Editing
The Navigation menu bar contains menu items that allow user to go to different configuration pages.
The following table summarizes functionalities available for the menu item links.
Table 2-2 Description of Menus
Menu Item Menu Sub-items Description
Home Summary Info Displays summary page with
information such as Ethernet and
Wireless settings.
Allows user to set the IP settings for
Ethernet (wired side) and Wireless
interfaces depending on the device
operational mode.
Bridge Configuration Displays the bridge address, generic
bridge port table, spanning tree port
table for ports ETH A, ETH B, Radio A.,
etc
Bridge configuration option is available
when airPoint™ is configured as a
Bridge. Networking
Traffic Statistics Displays the Ethernet and Wireless
Traffic Statistics
Radio Main
Wireless Settings:
Allows user to set SSID, Channel,
ACL Controls and Country, as well
as Dial a Power.
Provides a link to view associations.
Performance:
Allows user to set Fragment
Length, RTS/CTS Length, RSSI
Threshold and Throughput
Optimizer. Radio Operation mode
is set to mixed 802.11a/b/g by
default.