SmartBridges sB3210 - Manual (Page 29)

Page 29 of 55
airPoint™ Nexus User Configuration Guide
i n t e l l i g e n t w i r e l e s s p l a t f o r m
4) External ACL(Radius) & Internal ACL:
This mode allows the user to use an External Radius as well as an Internal ACL for client
authentication. The entry in the Internal ACL has more precedence than the External ACL table (WDS
entries still need to be local).
a. The user needs to give the Radius server address and secondary radius server address if any.
b. The shared key value with which the Radius client can establish a connection with Radius
Server has to be given.
c. The Port number through which the communication is going to take place has to be given.
d. Re-auth time specifies the interval at which re-authentication takes place.
e. Enter the Internal ACL Mac addresses or WDS addresses if any (Internal Authentication has
more precedence than External Authentication).
Figure 3-4 External ACL (Radius) & Internal ACL
5) WPA-Radius:
This mode allows the user to use an external radius for client authentication. This makes use of the
EAP-TLS. There is no WDS in this case as WDS does not work with WPA.
a. Give the Radius Server Address and secondary Radius server address if any.
b. The port number has to be specified with which the communication is going to be established
between the client and the server.
c. The Re-auth timer value specifies the interval at which re-authentication takes place.