Location and function of parts and controls, Front, Rear – Sony UP-D77MD User Manual
Page 6: Front rear
Int
ro
duc
tion
Location and Function of Parts and Controls
6
Location and Function
of Parts and Controls
For details, refer to the pages indicated in parentheses.
Front
A !POWER switch
Press to turn the printer on or off.
Provided to prevent the printer from dust.
C Ribbon door (9)
Pull the tab (marked with PULL) on the top on the
ribbon door to open it when loading an ink ribbon
cassette.
D Printer window display (12)
Displays the status messages. In menu operation,
menu items are displayed.
If an error occurs, a corresponding error message is
displayed.
E ALARM indicator (21)
Lights in orange when the ink ribbon or paper is
exhausted, the paper jams, or another problem
occurs.
F Cursor control buttons (13)
Use these buttons to increase or decrease a value
and level shown on the menu, or scroll up and down
through a menu.
G MENU button (13)
Press this button to display or close the printout
adjust menu in the printer window display.
H EXEC button (13)
Use this button in menu operation.
I Paper cover (7)
Printouts are ejected here.
Load paper here. Press the point marked with
PUSH to remove the paper tray.
Rear
A Network connector (RJ-45 modular jack) (8)
Conforms to the 100BASE-TX standard. Used to
connect to the LAN.
When using a LAN cable:
CAUTION
For safety, do not connect to the connector for
peripheral device wiring that might have excessive
voltage.
B
Equipotential ground terminal connector
Used to connect to a ground (equipotential) plug to
bring the various parts of the system to the same
potential.
Refer to “Important safeguards/notices for use in
the medical environments” on page 2.
C -AC IN connector (8)
Use a proper power cord for your local power
supply (not supplied).Refer to “Warning on power
connection” on page 3 and “Warning on power
connection for medical use” on page 3.