Sharp UX-S10 - Manual (Page 23)

Setting the Reception Mode
21
1. Ins
tal
lati
on
Setting the Reception Mode
Your fax has the following four modes for receiving incoming faxes.
Note: SMS messages can be received in any of the reception modes.
FAX mode:
Select this mode when you only want to receive faxes on your line. The fax
machine will automatically answer all calls and receive incoming faxes.
TEL mode:
This mode is the most convenient for receiving phone calls. Faxes can also be
received; however, all calls must first be answered by picking up the fax's
handset or an extension phone connected to the same line.
TEL/FAX mode:
This mode is convenient for receiving both faxes and voice calls. When a call
comes in, the fax will detect whether it is a voice call (including manually
dialled faxes), or an automatically dialled fax. If it is a voice call, the fax will
make a special ringing sound to alert you to answer. If it is an automatically
dialled fax, reception will begin automatically.
A.M. ( ) mode:
Select this mode when you go out and want the built-in answering machine to
answer all calls. Voice messages will be recorded, and fax messages will be
received automatically.
Setting the reception mode
Make sure a document is not loaded in the document feeder, and then
press until the display shows the desired mode.
AUFLÖS./
EMPFANG
AUFLÖS./
EMPFANG
1
9
4 5 6
7 8
0
2 3
For more information on receiving faxes in FAX and TEL modes, see Chapter
5, Receiving Faxes. For more information on using A.M. mode, see Chapter 3,
Using the Answering Machine.