Ogm only mode – Sharp UX-S10 User Manual
Page 49
Optional Answering Machine Settings
47
3. A
n
s
w
er
ing
Mac
h
ine
1
Press
once and
once.
2
Press
once and
twice.
3
Press .
4
Press
to turn on automatic fax
reception, or
to turn it off.
5
Press
to return to the date and time display.
FUNKTION
1
2
STOP
♦
Automatic fax reception YES: The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see Remote Operations on page 53).
Automatic fax reception is set to NO at the factory before shipping. If you want
to set it to YES, press the panel keys as follows:
Display:
The display briefly shows
your selection, then:
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message.
(The machine will still receive faxes sent by automatic dialling.)
1
Press
once and
once.
2
Press
once and
once.
FUNKTION
Display:
1=YES, 2=NO
A.M. SETTING
OGM ONLY MODE
A.M. SETTING
ON A.M.FAILURE
OGM ONLY MODE