Sharp UX-S10 - Manual (Page 33)

Sending an SMS Message
31
2. SMS
T
e
x
t
Mes
s
ages
Sending an SMS Message
This section explains how to write and send an SMS message. A maximum of
160 characters can be entered in one message.
♦
When sending a message, you can manually enter the full phone number
of the recipient, or select the number from your list of auto-dial numbers.
Sending an SMS message by manually entering the
number
1
Press once and twice.
•
Note: If you have an unread received message, the message will appear
when you press . Read the message first (see page 36) and then
perform this procedure.
2
Press .
3
Press .
4
Enter the number of the recipient. Up to 20 digits can be entered. (Note
that a space cannot be entered.)
Important: The number must include the area code.
•
To clear a mistake, press .
•
If a pause is required between any of the digits, press . The pause
appears as a hyphen. Several pauses can be entered in a row.
5
Press .
6
Enter the message by pressing number keys for each letter as shown in
the following chart.
SMS
SMS
FUNKTION
START/SPEICHER
Display:
WRITE MESSAGE
ENTER #
MANUAL DIAL
ENTER #