SUUNTO D3 - Manual (Page 41)

39
NOTE:
• While the selection is blinking and no button is
operated within 10 minutes, the blinking stops and
the D3 beeps and returns automatically to the time-
keeping display.
• The display is illuminated by holding down the M
button for more than two seconds.
4.2. DAILY ALARM SETTING [ALM]
You can set one daily alarm in the D3. When the daily
alarm activates, the -symbol blinks for 1 minute
and the alarm sounds for 24 seconds. The alarm is
given at the preset time each day. Press any button to
stop the audible alarm, after it has activated.
To set the daily alarm:
1. In the Setting Mode, press S two (2) times to select
the Daily alarm Setting Mode (Fig. 4.6.).
2. Wait two seconds until the Daily Alarm Setting
Mode activates automatically. The time mode indica-
tor appears and the alarm status [On/OFF] starts to
blink on the display (Fig. 4.7.).
A
C S
FR
E
E
Fig. 4.6. Daily Alarm Setting
Mode.
A
C S
FR
E
E
Fig. 4.7. Daily Alarm Setting
Mode is activated.