Instructions for the user – Smeg DI614H User Manual
Page 11
11
3. BEFORE USING AND SETTING UP YOUR APPLIANCE
The electronic control system allows you to customise your
appliance in a number of ways.
Use button (D) to select the customisation you require, then button
(E) to enable (1) / disable (0) or modify the parameters.
To exit the programming function press button (B).
Procedure
Customisation
Settings
long press on
button (D)
Buzzer enabling
Enable (1) / Disable (0)
second press
on button (D)
Water hardness
from h0 to h5
third press on
button (D)
Choice of language
(on some models only)
Language:
English
3.1 Buzzer enabling
With this function enabled (1), a buzzer sounds whenever the door
is opened and closed with a program running or selected, at the end
of the cycle and during programming procedures.
If it is disabled (0), the buzzer never sounds.
EN
Instructions for the User