Instructions for the user – Smeg DI614H User Manual
Page 22
22
8.4 ULTRA CLEANSE RINSE (depending on model)
Shown on DISPLAY (G): "
Ultra cleanse 1/0”.
Press (D) to display the option and press (E) to enable (1 on
display) or disable (0 on display) it.
This function performs an extra hygenic rinse at the end of the
washing cycle, assuring a further reduction in the number of
bacteria present.
If the temperature falls while the hygene rinse is in progress (e.g.
due to a power blackout or because the door is opened), the
DISPLAY (G) flashes until the dishwasher is switched off or a new
programme is set, to warn that the option has not been carried
out.
TO SAVE ENERGY AND PROTECT THE ENVIRONMENT
•
Try always to use the dishwasher with a full load.
•
Do not wash dishes in running water.
•
Use the most suitable washing programme for every type of
load.
•
Do not pre-rinse.
•
If available, connect the dishwasher to a hot water supply
system at up to 60°C.
•
When possible, skip the drying stage and simply leave the
door open after washing: the air and residual heat will dry the
dishes perfectly.
TO REDUCE DETERGENT CONSUMPTION AND PROTECT
THE ENVIRONMENT
The phosphates in dishwasher detergent are a problem from the
environmental point of view. The following rules will help you to use
less detergent, and also less electricity:
•
Sort your dishes, washing delicate items separately from those
more resistant to strong detergents and high temperatures;
•
Do not pour detergent straight onto the dishes.
EN
Instructions for the User