Sony HES-V1000 - Manual (Page 112)

112
Video Settings
The default settings are underlined.
Video Output Aspect Ratio 16:9
– Select this when connecting a wide-screen TV.
Original
– Select this when connecting to a TV with a wide-mode function.
A wide-screen TV also displays 4:3 screen pictures in 16:9.
4:3
– Select this when connecting a 4:3 TV without a wide-mode function.
For picture configuration, see “TV Display Viewing Options” (page 147).
z Hint
See also your TV manual for details about the wide mode function of a 4:3 TV.
– For your best viewing pleasure, select the
aspect ratio that best matches your needs. For
BD-ROMs or discs with AVCHD files, the
[16:9] aspect ratio is chosen automatically by
the application.
Video Input 1 Video
– Select this when connecting to the VIDEO jack.
S Video
– Select this when connecting to the S VIDEO jack.
– Select the signal type for the LINE IN 1
jacks.
Cinema Conversion Mode Auto
– Normally select this. The server automatically detects whether the material is video-
based or film-based, and switches to the appropriate conversion method.
Video
– The conversion method suited for video-based material will always be selected
regardless of the material.
– Sets the video conversion method for 480p,
720p, or 1080i signals from the HDMI OUT
jack or the COMPONENT VIDEO OUT
jacks.
Output Resolution Priority HDMI
– Outputs signals according to the [HDMI Resolution] setting below.
Component
– The type of output signal is affected by certain factors. See page 113. When this is
selected, [HDMI Resolution] will be set to [Auto].
– Allows you to select output priority from the
HDMI or component jacks.
HDMI Resolution Auto
– Normally select this, or automatically fixed if the above [Output Resolution Priority]
is set to [Component].
The server outputs signals starting from the highest resolution acceptable to the TV;
1080p > 1080i > 720p > 480p
If the resulting image format is undesirable, try another setting that suits the TV.
480p
– Outputs 480p video signals.
1080i
– Outputs 1080i video signals.
720p
– Outputs 720p video signals.
1080p
– Outputs 1080p video signals.
– Select the signal type for the HDMI OUT
jack.
Note that you can make this setting only
when the connected TV is turned on, and that
some options may not be displayed if they are
unacceptable for the TV.
YCbCr/RGB(HDMI) Auto
– Automatically detects the type of external device, and switches to the matching color
setting.
RGB
– Outputs RGB video signals.
YCbCr 4:4:4
– Outputs YCbCr 4:4:4 video signals.
YCbCr 4:2:2
– Outputs YCbCr 4:2:2 video signals.
– Sets the color setting for video signals output
from the HDMI OUT jack. Select the setting
that matches the type of TV, monitor, or
projector to be connected.
Video Output Aspect Ratio 16:9
Video Video Input 1
Auto
Component
Auto
Cinema Conversion Mode
Output Resolution Priority
HDMI Resolution
Settings