Operating registered devices, Manufacturer code lists, Programming av components to the device – Sony HES-V1000 User Manual

Page 127: Selection buttons, Other remote uses, A while holding down rm setup, press av \ / 1, D press enter

Advertising
background image

127

Other Remote Uses

Programming AV components to the
device selection buttons

You can use the remote with Sony and other branded AV
components. To use with other AV components, set the
component’s manufacturer code to the corresponding device
button on the remote (TV, VCR, CUSTOM buttons, etc.).
Codes that can be entered vary depending on the device selection
button (page 127).

a While holding down RM SETUP, press AV

\/1.

The RM SETUP button flashes.

b Press the desired device selection button

before the RM SET UP button stops flashing.

Both the RM SETUP button and the device selection
button flash.

c Enter the three-digit manufacturer code

using the number buttons (page 127).

For example, to enter 901, enter “9,” “0,” “1.”

d Press ENTER.

The RM SETUP button flashes twice and turns off.

z

Hints

• To exit the above procedures, press RM SETUP.
• When more than one code is listed, try until you find the one that

works.

• If you cannot finish entering the code, repeat from step 1.

Operating registered devices

a Press the device selection button (TV, AMP,

SAT/CABLE, VCR, or CUSTOM) to change
the remote’s mode.

The button lights up and remains lit for about 30
seconds.
You can operate the device until the device selection
button turns off and the remote returns to the server
mode.

Manufacturer code lists

Default Settings
The following codes are set to the device selection buttons by
default.

*1

Only the AV \/1, MUTING, VOL +/– buttons will work.

*2

TV codes (5xx) and AV amplifier codes (9xx) can be assigned to this
button.

*3

The following button functions are added to the AMP button. Refer
also to the instructions supplied with the amplifier.

z

Hint

To use the “ON SCREEN” function on a Sony AV amplifier, press
AMP, then press POP UP/MENU.

For AV amplifiers

For tuners

For CD players

For tape/DAT decks

For tape decks

SERVER

501 (Sony TV)

*1*2

TV

501 (Sony TV)

AMP

905 (Sony amplifier)

*3

SAT/CABLE

801 (Sony satellite tuner)

VCR

703 (Sony VCR)

CUSTOM

Button

Function Name

RED

2CH

GREEN

A.F.D.

BLUE

MOVIE

YELLOW

MUSIC

POP UP/MENU

ON SCREEN

Manufacturer

Code

Sony

905 906 907 908 909

Pioneer

910 913 920 930 932 934 935

Denon

911 916 917 918 923 924

Yamaha

912 919 927 938

JVC

914 915 928 929 931 936

Harman/Kardon

922

Onkyo

921 925 926 933

Manufacturer

Code

Sony

002 005

Manufacturer

Code

Sony

101 102 103

Denon

123 104

JVC

105 106 107

Kenwood

108 109 110

Magnavox

111 116

Marantz

116

Onkyo

112 113 114

Panasonic

115

Philips

116

Pioneer

117

Technics

115 118 119

Yamaha

120 121 122

Manufacturer

Code

Sony

203

Pioneer

219

Manufacturer

Code

Sony

201 202

Denon

204 205

Kenwood

206 207 208 209

Nakamichi

210

Panasonic

216

Philips

211 212

Pioneer

213 214

Technics

215 216

Yamaha

217 218

,continued

Advertising