Sony WEGA KV-27FS13 - Manual (Page 27)

To use PIP
1
Press the TV FUNCTION button on your remote to view a working
channel.
P I P
Press the button and the window picture appears.
Use the yellow labeled buttons on your remote control to control the
PIP features. See page 18 for descriptions on the PIP control buttons.
To check your PIP
1
Press the TV FUNCTION button on your remote to view a working
channel.
Press the
button and select that same channel again. You should
now have tne same program playing in both your main window and
your picture window.
Use the yellow
to change the channel in the picture window.
Now use the main on the bottom of your remote control to
change the channel in the main window.
Press the button to switch to other video inputs for other
equipment that is connected to any of the VIDEO IN jacks at the back
of your TV You should see a different picture in your PIP window for
each connected video equipment component. Make sure the
connected equipment is turned on and working when you perform
this test.
6
If the PIP feature does not work properly with the TV or the
connected video equipment component, refer to the Troubleshooting
section on pages 41-42 for possible solutions.