Sony WEGA KV-27FS13 - Manual (Page 35)

C h a n n e l
Channel
Skip/Add
Channel
L a b e l
Label up to 40
channels with
their call letters
‘when vou want to control all
through a cable or VCR. Select the appropriate channel
(usually 3 or 4) and use the cable box’s or VCR’s remote
control for channel selection.
Video 1:
Select from available video inputs when you have
connected video equipment (e.g. satellite receiver) and you
want your TV fixed to it.
A U X
2-6: Use this setting instead of the 2-6 if you want to
change channels using a cable box, VCR or satellite
receiver and you’ve connected it to the AUX input.
. .-. . . . . . . . .
Perform Auto Program whenever setting up your TV.
It will cycle through all available channels and program
any receivable channels.
you run Auto
unwanted channels or add new ones.
1
Use the buttons or the buttons to select
the channel.
2 Press to Skip or Add (only one option will be
available).
Channel window
1
Press then press or until you reach the desired
channel number.
2 Press to activate the channel.
3 Press then press to highlight the label field.
4 Press or to display the first call letter or number of
the caption and press to select it. When finished,
press to activate.