Sony WEGA KV-27FS13 User Manual
Page 51
the same
program in the
window picture
as in the main
picture
lost
remote control
both may be set to the same channel. Try changing
channels in either the main picture or the window
picture (pages 18-19).
Your TV may be set up to select all your channels
through a cable box. The cable box will only
unscramble one signal at a time, so you cannot use the
PIP feature. If possible, run a direct cable to the VHF/
UHF jack on your TV This will only work if your cable
system provides an unscrambled signal (page 5).
You can use the front Audio/Video panel controls to
access the menu. Press
to open the menu. Use the
or buttons on the front Audio/Video panel
instead of the or buttons on the remote control.
Use the button on the front Audio/Video panel
instead of the
and
buttons on the remote
control. Press
again when the setting or
adjustment is complete. Contact your nearest Sony
dealer to order a replacement.
.
after reading these Operating Instructions, you have additional questions related to the use
Sony television, please call our Direct Response Center at
(7669) (U.S. residents
only) or (416)
(7669) (Canadian residents only).