Oxygen exposure – SUUNTO D6 User Manual

Page 96

Advertising
background image

As a result, the allowed no-decompression-stop limits are considerably reduced.

9.3. Oxygen exposure
The oxygen exposure calculations are based on currently accepted exposure time
limit tables and principles. In addition to this, the dive computer uses several methods
to conservatively estimate the oxygen exposure. For example:

the displayed oxygen exposure calculations are raised to the next higher percentage
value

for recreational scuba diving, the recommended upper limit of 1.4 bar PO

2

is used

as a default

the CNS % limits up to 1.6 bar are based on 1991 NOAA Diving Manual limits

the OTU monitoring is based on the long-term daily tolerance level and the recovery
rate is reduced

Oxygen related information displayed by the dive computer is also designed to ensure
that all warnings and displays occur at the appropriate phases of a dive. For example,
the following information will be shown before and during a dive when the computer
is set in NITROX mode:

the selected O

2

% on the alternative display

OLF% alternative display for either CNS% or OTU% (whichever is larger)

audible alarms are given and the OLF value starts to blink when the 80% and 100%
limits are exceeded

audible alarms are given and the actual PO

2

value blinks when it exceeds the

preset limit

in dive planning, the maximum depth according to the O

2

% and maximum PO

2

selected

96

Advertising