Samsung SPD-1000 - Manual (Page 22)

43 42
Preset : 12 items such as Pan/Tilt location, Zoom and Focus are selected among camera
functions and they can be called for monitoring. Total 128 points can be preset.
Setting : Select the Preset number for setup. Adjust Pan/Tilt/Zoom and press the Enter key to
save the setting. If you want to change the 12 items such as Focus, Brightness, Iris
and Scene Adj., use the Up/Down key to go to and select the item. If you don’t
want to change the 12 items, press the ESC key to go to the next Preset step.
Edit : You can edit the 12 preset items such as Pan/Tilt location, Zoom and Focus,
which are selected among camera functions.
Execute : Select the Preset number for execution.
Clear
: Select the Preset number to delete for clearing.
Status : The current Preset number setup is displayed.
• Motion Detection Setting
Select Motion Detection in the Preset Setting menu and then turn on the mode.
Functional Description
2) Sequence Setting
• Sequence Setting Menu
• Preset Menu Setting
1. Select the Preset item on the Sequence Setting Menu
2. Select the Setting item.
3. Select the Preset number.
4. Set up the Zoom and Focus.
• When the illumination is shaking under direct lighting such as a fluorescent lamp, it may
cause malfunction of the camera. MD function is not recommended under this condition.
• When brightness of objects fluctuates suddenly due to lighting of flashlights or
headlights or the lamp going on/off, it may cause malfunction of the camera.
• The purpose of this security function is not to prevent accidents or crimes such as
fire or burglary. Our company is not responsible for the injury or damage caused by
the inadequate use of this function.
Notes
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Preset
Setting
Edit
Execute
Clear
Status
Preset Setting
Preset=001 (1~128) Preset Setting Z>ZOOM
PST 1 : ZOOM PST 2 : FOCUS
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Preset
Setting
Edit
Execute
Clear
Status
5. To change the camera settings, select Edit from the upper menu first. Select the item
to change, and then make the necessary adjustments.
Preset Edit [001]
PTZ 267/051/1X
Focus Mode One Shot AF
Brightness 025
Iris AUTO
Back Light OFF
Day & Night COLOR
Motion Det. OFF
Scene Adj