Sprint Nextel 900MHz Digital Cordless Phone with Call Waiting - Manual (Page 22)

19
HEADSET OPERATIONS
Your Sprint cordless phone is
equipped with a 2.5mm Headset Jack for
use with an optional accessory Headset
for hands-free operation.
If you choose to use the Headset option,
you must obtain an optional accessory
Headset, which is compatible with the
Sprint cordless phone.
To purchase a Headset, please visit
1-800-624-5688.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the Sprint cordless phone Handset.
Connect the plug on the Headset cord
to the jack on the cordless Handset.
The plug should fit securely. Do not
force the connection.
OPERATION
NOTE: Whenever a compatible Headset
is connected to the cordless Handset, the
microphone on the Handset will be muted.
This is done to limit the effect of back-
ground noise.
The following operational characteristics
also apply to other headsets which are
not sold by Sprint; however, Sprint
assumes no responsibility for their
performance.
The Sprint compatible Headset
has a reversible, monaural design. You
can wear your Headset on either ear,
leaving one ear free for room conversa-
tion.
The headband can be adjusted to fit the
contour of your head. Using both hands,
slide the headband up or down so that it
rests comfortably on your head, with the
speaker cushion centered against your
ear.
For maximum sound quality, the flexible
microphone should be positioned at the
corner of your mouth, about one inch from
your face.
BELT CLIP
The Sprint cordless phone is also
equipped with a detachable belt clip.
Align the pins on the inside edge of the
clip with the notches on the sides of the
Sprint cordless phone Handset.
The belt clip should snap securely into
place. Do not force the connection.
your local Sprint store or call VTech
at