Sprint Nextel 900MHz Digital Cordless Phone with Call Waiting - Manual (Page 9)

6
• Plug the AC POWER ADAPTER into a
live electrical outlet and the DC POWER
CONNECTOR into the back of the Base
Unit.
• Slide the Handset battery cover down,
and remove it from the Handset.
• Install the BATTERY PACK, with the
metal contacts facing down and aligned
with the Handset contacts. Replace
Handset battery cover.
• Place the Handset into the Base Unit
cradle. Make sure the Charging light is
illuminated. Charge for at least 16
hours before first using the phone.
The Handset can charge face up or
down.
• Set the TONE/PULSE switch, located
on the antenna side of the Base Unit,
to the desired dialing mode. In most
areas, TONE is the desired mode.
GETTING STARTED
PLEASE NOTE THE
CORRECT POSITION
OF THE BATTERY
PACK WHEN INSTALLING
SLIDE IN THE
BATTERY
COVER
PRESS and SLIDE
DOWNWARD
RINGER
PULSE TONE OFF LOW HI
BASE RINGER
SWITCH
TONE/PULSE SWITCH
AC
OUTLET
9V DC TEL.LINE