Samsung Msys SF-830 - Manual (Page 88)

O THER W AYS T O F AX 7.3
7
4 Enter the number of the remote machine using the number
keypad.
To enter the number, you can also press a one-touch
button, or press Speed/Status and enter a speed dial
number including a group dial number.
5 Press Enter to confirm the number on the LCD display. The
display asks you to enter another fax number to send the
document.
6 To enter another fax number, select “1.YES” and repeat step
from 4. You can add up to 25 destinations.
Note that you cannot use Group dial numbers for another
fax number.
7 To send to one location or when you complete the last fax
number setting, select “2.NO”.
8 The LCD display asks you to enter a name. If you want to
assign a name to the transmission, enter the name. If not,
skip over this step.
For details on how to enter the name using the number
keypad, see “Entering Characters Using the Number
Keypad” on page 2.3.
9 Press Enter. The display shows the current time and asks
you to enter the start time when the fax is to be sent.
10 Enter the time by using the number keypad.
To select AM or PM for 12-hour format, press or . If
you set a time earlier than the current time, the document
will be sent at that time on the following day.
11 Press Enter when the start time displays correctly.
12 The document will be scanned into the memory before
transmission. The display shows the memory capacity and
the number of pages being stored in the memory.
13 The product returns to Standby mode and the LCD display
reminds you that you are in Standby mode and that
Delayed Transmission is set.