Samsung Msys SF-830 - Manual (Page 92)

O THER W AYS T O F AX 7.7
7
6 The display asks you to store the document in the product’s
bulletin memory.
7 Press or to select “ON” or “OFF”. Then press Enter.
Select “ON” if you want store the document in the bulletin
board memory. More than one remote station can poll that
document from your product.
If not, select “OFF”. The document will be automatically
erased after being polled by a remote machine.
8 The product stores the document in the memory. The
display counts the number of pages being stored in the
memory and the memory capacity remaining.
9 The LCD display shows that the machine has a Poll sending
job and returns to Standby mode.
N OTE : If you have previously set the receive mode to other than
FAX mode, the product automatically switches to FAX mode
(automatic receiving) when set to be polled.
Delay RX Poll
You can set your product to automatically receive documents
from the unattended remote fax machine now, or at a later time.
This feature permits unattended polling in the evening hours
when telephone rates are lower.
N OTE : The remote machine must be ready for polling.
1 Press Menu and then or repeatedly until “POLLING”
appears on the display, then press Enter.
2 Press or to select “DELAY RX POLL” and press Enter.
The LCD display asks you to enter the number of the
remote fax machine.
3 Enter the number of the remote fax machine using the
number keypad.
To enter the number, you can also press a one-touch
button, or press Speed/Status and enter a speed dial
number.