Samsung Msys SF-830 - Manual (Page 128)

T ROUBLESHOOTING 10.5
10
Fuser Area
If jammed in the fuser area, “PAPER JAM 1” appears in the
display.
N OTE : The fuser area is hot. Take care when removing paper
from the product.
1 Press the release lever to open the side cover.
2 Pull down the fuser lever as shown below.
This will release pressure on the paper.
N OTE : Do not pull paper up through the fusing unit. Unfused
toner may adhere in the area, resulting in smudged copies.
3 Remove the jammed paper, in the direction shown.