Samsung Msys SF-830 - Manual (Page 40)

G ETTING S TARTED 2.5
2
Inserting a Pause
With some telephone systems, you must dial an access code (9
for example) and listen for a second dial tone. In such cases,
you must insert a pause in the telephone number. You can insert
a pause while you are setting up one-touch dial, or speed dial
number.
To insert a pause, press Redial/Pause at the appropriate place
while entering the telephone number. A “–” will appear on the
LCD display at the corresponding location.
Setting Date and Time
The current time and date are shown on the LCD display when
the product is on and ready for fax (Standby mode). The time
and date are printed on all faxes you send.
Note: If power to the product is cut off for over 30 minutes, when
power is restored, the product prompts you to reset time and date.
1 Press Menu and then or repeatedly until “DATE &
TIME” appears on the display, then press Enter.
2 Enter the correct time and date using the number keypad.
Day = 01 ~ 31
Month = 01 ~ 12
Year = requires the four digits
Hour = 00 ~ 23(24-hour mode)
01 ~ 12(12-hour mode)
Minute = 00 ~ 59
You can also use or to move the cursor under the digit
you want to correct, and enter a new number.
3 To select AM or PM for 12-hour format, press or .
You can change the clock mode to 24-hour format (e.g.
01:00 PM as 13:00). For details, see page 8.6.