Samsung Msys SF-830 - Manual (Page 42)

G ETTING S TARTED 2.7
2
Setting Sounds
You can control the following sounds:
• Ringer Volume - You can adjust the ringer volume.
• Alarm Sound - You can turn the alarm sound on or off. With
this option set to “ON,” alarm tone sounds when an error
occurs or fax communication ends.
• Key Sound - With this option set to “ON,” key tone sounds
each time any key is pressed.
• Speaker Control - You can turn on or off the speaker. With
this option set to “COM,” the speaker is on until the remote
machine answers.
• Speaker Volume - You can adjust the volume of the speaker
to the desired loudness.
Ringer Volume, Alarm Sound, Key Sound,
Speaker Control
1 Press Menu and then or repeatedly until “SYSTEM
SETUP” appears on the display, then press Enter.
2 Press or to scroll through the options. Press until you
see the desired option, then press Enter.
3 Press or to display the desired status or loudness for
the option you have selected.
You’ll see the selection on the lower line of the LCD display.
For ringer volume, 10 levels are available. You’ll also hear
the selected loudness. Setting to the left end turns the
ringer off. The product will work normally even if the ringer
is set to off.
4 Press Enter to save the selection. The next system setup
option appears.
5 If necessary, repeat steps 2 to 4. To return to Standby
mode, press Stop/Clear.