Samsung Msys SF-830 - Manual (Page 49)

C OPYING 3.4
• Store unused media at temperatures between 59 o F and 86 o F
(15 o C to 30 o C). The relative humidity should be between 10%
and 70%.
• Do not load more than 10 sheets of special media into the
Bypass Tray at a time.
• Verify that the labels’ adhesive material can tolerate fusing
temperature of 392 o F (200 o C) for 0.1 second.
• Make sure that there is no exposed adhesive material
between the labels. Exposed areas can cause labels to peel
off during printing, which can cause paper jams. Exposed
adhesive can also cause damage to product components.
• Do not feed a sheet of labels through the product more than
once. The adhesive backing is designed for one pass through
the product.
• Do not use labels that are separating from the backing sheet
or are wrinkled, bubbled, or otherwise damaged.
Loading Paper in Tray
The Tray 1 can hold a maximum of 550 sheets of 20lb plain
paper. You can use A4-, letter-, folio and legal-size paper.
If you purchase an optional tray and attach it below the standard
Tray 1, you can also load paper in the optional Tray 2.
To load paper, pull open the Tray 1 or the tray 2 and load paper
with the print side facing up.