Samsung Msys SF-830 - Manual (Page 66)

S ENDING A F AX 4.5
4
Contrast
1 Press Contrast to compensate for the brightness or
darkness of your faxed document.
2 By pressing Contrast repeatedly or using the navigation
buttons, you can choose from 5 contrast levels.
Set to darker mode when the document contains faint
pencil markings or light print.
Set to lighter mode for dark print.
Image
Image setting is used to select the text type for the current copy
or fax job. To select the image type, take the following steps:
1 Press Image. You can see the current setting on the
bottom line of the display.
2 Press Image or the navigation buttons repeatedly until the
desired mode appears. You can choose from:
TEXT: Use for documents containing mostly text.
MIXED: Use for documents with mixed text and graphics.
PHOTO: Use when the originals are photographs.
Sending a Fax Automatically
1 Feed the document(s) face down into the ADF.
2 Adjust the document settings if necessary. For details, see
“Adjusting Document Settings” on page 4.4.
3 Enter the remote fax phone number using the number
keypad.
To enter the number you can also press a one-touch button,
or press Speed/Status and enter a speed dial number
including a group dial number.