Samsung Msys SF-830 - Manual (Page 74)

R ECEIVING A F AX 5.5
5
Receiving Manually in TEL Mode
1 Press Menu and then or repeatedly until “SYSTEM
SETUP” appears on the display, then press Enter.
The display shows “RECEIVE MODE” on the top line and the
current setting on the lower line.
2 Press or until you see “TEL” on the lower line, then
press Enter to save the selection.
3 When the ringer sounds, press On Hook Dial.
4 If you hear a fax tone, press Copy/Start. The product
begins receiving a fax.
Receiving Manually Using an
Extension Telephone
This features works best when you are using an extension
telephone connected to the EXT jack on back of your product.
You can receive a fax from someone you are talking to on the
extension telephone without having to go to the fax machine.
When you receive a call on the extension phone and hear fax
tones, press the buttons “*9*” (star nine star) on the extension
telephone.
The product receives the document.
Press the buttons slowly in sequence. If you still hear the fax
tone from the remote machine, try pressing “*9*” once again.
“*9*” is the remote receive code preset at the factory. The first
and the last asterisks are fixed, but you can change the middle
number to whatever you choose. For details on changing the
code, see page 8.5.