Samsung Msys SF-830 - Manual (Page 77)

A UTOMATIC D IALLING 6.2
One-Touch Dialling
The 25 one-touch buttons on the control panel lets you store
frequently used fax numbers and automatically dial a number
with one touch of a button.
Using the Shift button, you can store up to 50 fax numbers on
the one-touch buttons.
Storing a Number for One-Touch Dialling
1 Press and hold one of the one-touch dial buttons for about 2
seconds.
If you want to use one-touch dial buttons from 26 to 50,
press Shift and press and hold the one-touch dial buttons
for about 2 seconds.
The LCD display asks you to enter the fax number.
“T” signifies you are assigning a one-touch number and “xx”
designates the selected one-touch button.
If a number is already stored in the location you chose, the
LCD display shows the number to allow you to change the
number. To start over with another one-touch button, press
Stop/Clear.
2 Enter the number you want to store by using the number
keypad and then press Enter.
To insert a pause between numbers, press Redial/Pause
and a “–” appears on the LCD display.
If you make a mistake while entering a number, press
Search/Delete and re-enter the correct number.
3 To assign a name to the number, enter the desired name.
For details on how to enter names, see “Entering Characters
Using the Number Keypad” on page 2.3.
Or,
If you do not want to assign a name, skip this step.