Samsung Msys SF-830 - Manual (Page 80)

A UTOMATIC D IALLING 6.5
6
Speed Dialling
You can store up to 200 numbers in Speed Dial locations (1-
200).
Storing a Number for Speed Dialling
1 Press and hold Speed/Status on the control panel for
about 2 seconds.
2 Enter a speed dial number by using the number keypad and
press Enter.
If a number is already stored in the location you chose, the
LCD display shows the number to allow you to change the
number. To start over with another speed-dial number,
press Stop/Clear.
3 Enter the number you want to store by using the number
keypad and press Enter.
To insert a pause between numbers, press Redial/Pause
and a “-” appears on the LCD display.
N OTE : If you make a mistake while entering numbers, press at
the end of the entries to delete the last digit or press Search/
Delete to delete all digits you entered.
When the cursor is in the first digit or in the middle of the number,
you can use
or to move the cursor under the wrong digit to
correct.
4 To assign a name to the number, enter the desired name.
For details on how to enter names, see “Entering Characters
Using the Number Keypad” on page 2.3.
Or,
If you do not want to assign a name, skip this step.
_