Smart Technologies Smart Document Camera 330 - Manual (Page 11)

5 | CHAPTER 1 – OVERVIEW
Side connection panel
The side connection panel has a security lock slot, an SD or SDHC memory card slot,
a USB-A connector, a switch for selecting VGA, DVI-D or composite video output, and
a switch to select either SXGA, WXGA, 720p or XGA resolution.
NTSC/PAL switch
The NTSC/PAL switch is located on the bottom of your document camera. This switch
enables you to change the format of composite video output for your television. See
Switching between NTSC and PAL on page 11.
Power supply
Your document camera comes with a power supply and a
country-specific power cable.
USB cable
Use the USB cable to connect your document camera to your
computer. You can display objects, capture images to
SMART Notebook files and control your document camera
from SMART Notebook software.
VGA cable
Use the VGA cable to connect your document camera to a
projector or display. You can display objects, capture images
to an SD or SDHC memory card and use the features in the
on-screen display menus.
K SD
VG
A
D VI -D
Co
m p o si te
SXG
A
WX
G A
72 0 P
XG
A
Security Lock Slot
SD or SDHC Memory Card Slot
USB-A Connector
VGA DVI-D / Composite Switch
SXGA / WXGA / 720p / XGA Switch