Smart Technologies Smart Document Camera 330 User Manual
Page 25
19 |
CHAPTER 3 – USING YOUR DOCUMENT CAMERA
Using your document camera with SMART
Notebook software
Your document camera integrates with SMART Notebook software, allowing you to
control your document camera from your computer or a SMART Board interactive
whiteboard. You can display objects, capture an image and your annotations on an
image to a SMART Notebook page, zoom, focus and adjust brightness settings.
To display objects
1. Press the power button on the control panel.
2. Set your document camera to Computer view (see page 21) or Camera view (see
3. Start SMART Notebook software.
4. Place the object you want to display under your document camera.
5. Rotate the camera head and aim the lens at your subject.
6. In SMART Notebook software, press the document camera icon.
OR
Select Insert > Picture From SMART Document Camera from the menu.
The SMART Document Camera object appears displaying your subject.
IMPORTANT
If you can’t control your document camera from SMART Notebook, ensure
that your document camera is set to Application mode. See page 34.
To adjust the zoom
magnification
Press the zoom plus or minus buttons in SMART Notebook software to increase or
decrease the zoom magnification.
OR
Use the zoom dial on your document camera.
To adjust the focus
1. Press the auto focus
button in SMART Notebook to focus automatically.
2. If necessary, press the focus plus or minus buttons to adjust the focus.
To adjust the brightness
Press the brightness plus or minus buttons to either increase or decrease subject
brightness.