Schneider Electric SURTD 3000 - Manual (Page 2)

2
Introduction
The APC
®
by Schneider Electric Smart-UPS
®
RT is a high-performance, uninterruptible power
supply (UPS) that provides protection for electronic equipment from utility power blackouts,
brownouts, sags and surges. The UPS filters small utility line fluctuations and isolates electronic
equipment from large disturbances by internally disconnecting from utility line power. The UPS
provides continuous power from the internal battery until utility power returns to safe levels or the
battery is fully discharged.
I
NSTALLATION
Read the Safety Guide before installing the UPS.
Unpacking
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
„ UPS (with battery modules disconnected)
„ Front bezel
„ Literature kit containing:
„ Product documentation
„ Smart-UPS RT User Manuals CD
„ Warranty Information
„ XLT/XLI/ XLTW models:
PowerChute
®
software CD
„ Serial cable
„ 3000 VA XLI models: three output power cords,
two input power cords
„ 3000 VA models: conversion faceplate for
accommodating a Network Management
Card
„ 5000 VA XLI models: six output power cords,
Network Management Card documentation
Specifications
T EMPERATURE
O PERATING
S TORAGE
32° to 104° F (0° to 40° C)
5° to 113° F (-15° to 45° C) charge the UPS
battery every six months
M AXIMUM
E LEVATION
O PERATING
S TORAGE
10,000 ft (3,000 m)
50,000 ft (15,240 m)
This unit is intended for indoor use only.
Select a location sturdy enough to
handle the weight.
Do not operate the UPS where there is
excessive dust or the temperature and
humidity are outside the specified limits.
Ensure that the air vents on the front
and rear of the UPS are not blocked.
H UMIDITY 0 to 95% relative humidity
W EIGHT
UPS
UPS
WITH
P ACKAGING
120 lbs (55 kg)
140 lbs (64 kg)