Schneider Electric SURTD 3000 User Manual
Page 5
5
B
ASIC
C
ONNECTORS
serial com
The serial connector is to be used for interfacing with APC PowerChute
software and terminal emulation software.
Use only cables approved by APC.
Any other interface cable will be incompatible with the UPS
connector.
normal bypass
Manual bypass enables the user to manually put connected equipment into
bypass mode.
EPO terminal
Emergency Power Off terminal allows the user to connect the UPS to the
central EPO system.
TVSS screw
The UPS features a transient voltage surge-suppression (TVSS) screw for
connecting the ground lead on surge suppression devices such as telephone
and network line protectors.
When connecting grounding cable, disconnect the unit from the utility
power outlet.
external battery
pack connector
Optional external battery packs provide extended run time during power
outages. These units support up to ten external battery packs.
See the APC Web site,
www.apc.com
for the information on the external
battery pack, SURT192XLBP.
5000 VA
XLI models
output circuit
breakers
3000/5000VA
XLJ/XLT/
XLTW
models
output circuit
breakers