Sherwood DD-6200 - Manual (Page 13)

1 3
When this unit is connected to a Sherwood compatible CD player controlled remotely by the DIGI LINK III system,
the CD synchro recording can be performed.
During CD synchro recording, only the STOP button
of the Deck A function buttons does work.
Notes
Because CD synchro recording starts from the front side, if there is not the erase-protection tap on that
side, CD synchro recording can not be performed.
During CD synchro recording, if other program source on the amplifier is selected, the unit stops CD
synchro recording and starts recording the selected program source.
The CD is selected automatically on the amplifier
bearing the DIGI LINK III logo.
If 8 seconds elapses after starting recording, the CD
player starts automatically.
Do the steps 1, 2 and 3 in
“RECORDING” procedure.
1
To stop recording.
9
According to the tape length, edit the
tracks to be recorded on the CD player
referring to the operating instructions of
that.
2
Start CD synchro recording.
3
To stop CD synchro recording.
4
CD SYNCHRO RECORDING
CD SYN REC