SMC Networks M8501 - Manual (Page 68)

Troubleshooting
M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-001
6- 12
Fault Symptom Codes (FSCs)
SMX send error A001 C, G An attempt to place a message on a
task’s exchange generated a kernel error.
SMX receive error A002 C, G An attempt to receive a message from a
task’s exchange generated a kernel error.
Comm free list empty A003 C, G An attempt to acquire a message from the
free pool failed because the pool is empty.
Invalid comm. put
attempt A004 C, G An attempt to place a message on a
task’s exchange failed because either the
argument message pointer was NULL or
the argument exchange pointer was
NULL.
Invalid comm. get
attempt A005 C, G An attempt to receive a message from a
task’s exchange failed because the
argument exchange pointer was NULL.
Comm initialization
error A006 C, G The Comm manager could not be
initialized at power-up because the
system is out of memory.
Put of a NULL comm. A007 C, G An attempt to place a Comm block on a
task’s exchange failed the argument
Comm block pointer was NULL.
Msg contains no
comm. A008 C, G A message obtained from the free pool
did not contain a Comm block.
Comm return address
in unknown A009 C, G An attempt to return a command
response to the originating task failed
because the originator could not be
determined.
Bad Image CRC F001 F The uploaded firmware image has a bad
CRC and is probably corrupted.
Flash erase sector
failed F002 F One of the flash memory sectors could
not be programmed.
Flash program sector
failed F003 C, G One of the flash memory sectors could
not be erased.
Bad flash CRC F004 C, G The firmware image programmed into
flash memory has a bad CRC and is
probably corrupted.
Flash exit error F005 C, G Internal flash task error.
Incompatible image F006 F The uploaded firmware image is not
compatible with the ACL hardware,
possibly an older firmware version.
Buffer allocation failed F402 F The flash task could not allocate a buffer
area to hold the firmware image to be
uploaded.
Table 6-2. Fault Symptom Codes
Message FSC ERP