Sharp LL-T1610W - Manual (Page 24)

24
Adjusting the screen display (when using a digital signal)
MODE SELECT Menu
Notes:
•
Depending on the resolution of the input signal, even
if menu options can be selected, the display may not
change.
• To choose a menu option: SELECT button
• When adjustment complete: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the left
and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up and
down. ( buttons)
EXPAND (Screen expansion)
For display modes of less than 1280 X 1024 pixels, the
display can be expanded if desired. ( buttons)
OFF: Expansion off
ON1: Using the fixed aspect ratio,
the entire screen is enlarged.
ON2: The entire screen is enlarged.
Note:
•
If a resolution of 1280 X 1024 pixels cannot be
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not a
malfunction.)
SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharpness of
the image can be adjusted. ( buttons)
Note:
•
If [EXPAND] is set on [OFF], [SCALING] cannot be
adjusted.
COLOR MODE
If this is set on [OFF], the original color scheme of the
LCD monitor will be displayed. If this is set on [ON], the
colors of will be corrected according to the computer
image. ( buttons)
Note:
•
To set [COLOR MODE] to [ON], set the [WHITE
BALANCE] to [STD].