Sharp LL-T1610W - Manual (Page 25)

25
English
Adjusting monitor brightness and angle
Adjusting the backlight
Carry out the commands without the On Screen Display
(OSD) Menu displayed. If the OSD Menu is displayed,
press the MENU button (several times may be required)
and begin when the OSD Menu has disappeared.
1. Without the OSD Menu being displayed, push the
or the button.
The [BRIGHT] bar will be displayed on the screen.
2. Adjust by pressing the button (darker) or button
(lighter).
Note:
•
The BRIGHT bar automatically disappears several
seconds after the last command.
Adjusting the angle of the monitor
Lightly holding both sides of the monitor, adjust it to a
suitable viewing angle.
CAUTION!
• Pressure from hands on the LCD panel could cause
damage.
45
45
30